The Thunderbolt 3 Dock’s Thunderbolt 3 downstream port supports up to 8K@30Hz resolution. If you cannot get your monitor working through this port, it could be due to an issue with the connected laptop, the connected cable, the monitor, or the dock itself.

Here are some troubleshooting tips that may help identify and resolve the problem.

For the laptop:

• If your connected laptop does not support Thunderbolt, then the Thunderbolt 3 downstream port will not support the media display.
• Try using the dock with a Thunderbolt laptop to see whether the problem still persists.

For the display cable:

• Try connecting to the monitor with a different display cable.
• If possible, connect your display cable directly to your laptop and see if you get a stable display.

For the monitor:

• Make sure the monitor is configured to the correct input.
• Try connecting the dock to a different monitor.

For the hub/dock:

• Check to see if the dock is correctly connected to your laptop and if the dock's LED light is on when the power button is pressed down.

1) Use the Thunderbolt 3 cable that came with the dock to connect the dock's Thunderbolt 3 upstream port (with a computer icon) to your laptop.

2) Plug one end of the included power adapter into the DC-IN port and the other into a power outlet.

3) Press down the power button, and the LED will turn green and then blue. If the light does not turn on, the dock may be defective.

If you’ve tried all of the above tips and the problem still persists, please contact MyAnker Customer Support for further assistance. Make sure to briefly mention the tips you’ve already tried so that a solution can be provided faster.